Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However when windows with double panes are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

If you are going attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and uPVC repair eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues that include sliding. A sagging window in upvc window repairs can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to find a smoky wall and wet floors. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may have to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze, it may be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is essentially a simple procedure, but it is simpler with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. If they're beyond repair, uPVC repair it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it is feasible to give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.