Locked Keys in Car? Here's How to Open Your Car Without Damage

If you've locked your keys inside your car, don't be afraid. You can try many tricks before calling a roadside assistance or locksmith service.

For example, you can make use of a shoelace that has an a slip knot to secure a post lock or a coat hanger made of wire that you untwist and mold into hook. You can also make use of a door wedge or inflatable wedge.

Pump Wedge

If you've been stuck in a car locked up and none of the DIY methods such as wire hangers, shoestrings or wedges work for you then it's time to call in an expert. A locksmith or repo service provider may have specialized lockout equipment that can allow you to unlock your car without damaging it.

If they do, be sure you are using them correctly. Be aware of where to place the wedge tool. Many people put the wedge on the top corner of the door, where it is most vulnerable to being damaged. This is not a good idea because you're likely to damage the weather stripping or wires within the door. Place the wedge in the area where you can see the largest gap and where the highest leverage is.

The Pump Wedge is a high-quality inflatable wedge made of heavy duty non-marring vinyl material. It is able to slide between the vehicle door and the door frame and is pumped up to create a space that allows you to insert other tools such as a long reach tool rod for opening your car. It also has a hook at one end that you can use to hold the latch on the door handle.

A less expensive version of this is to use a pair of wooden door stops. You can place them at the back of the car door to make the space wide enough to accommodate a rod. You could also try using an jim that is slim which is a thin metal strip that can be bent into a hook to latch to the lock and then pull it up. This method isn't without practice however, as you need to be careful not to tear the door's weather stripping.

A shoelace is a good alternative, but it's only with older cars that don't have a push button for the unlock mechanism. You can tie a slip knot through the middle of the lace and then move it up and down through the door's seam until it reaches the latch. Then, you can move the lace until it hooks the lock, then tighten the slip knot and pull upward. This method can be more difficult than other methods and could scratch the paint or damage the door trim if you're not vigilant.

Inflatable Wedge

If you own an inflatable wedge-shaped car door opener, you'll be able to easily unlock your vehicle without the need for prying or slim jim tools. These car door wedges can be inserted between the window and the frame of the vehicle, and when inflated, they create a space sufficient to accommodate an extended-reach tool like slim jims or a button grabber. This method is less risky than using tools to pry and can be used when you do not have a screwdriver.

A coat hanger that is wired into a hook is a different option to unlock a car without damaging its interior or exterior. This can be used to grasp the lock and may be more effective than a flat screwdriver since it is less likely to cause damage to the paint on the car. However, you must examine all doors to make sure there is no other method to gain entry.

You can also make use of a plastic bag that has been twisted into a noose or v-shaped shape. Be careful not to tear the bag because it could cause problems worse. This method is particularly useful if you are struggling to locate the button to lock it. It may not be as reliable as using a wedge or a metal coat hanger, but it can be helpful when you are in a tight spot.

The best advice we can offer you regarding getting locked out of your vehicle is to be at peace and focus on safety. There are a variety of solutions to this issue. If you have read this article, you'll be prepared for any scenario that might arise. By following the steps we've given to you, you'll be in a position to unlock your car open service and get on with your day without causing unnecessary stress or damage. If you're able, take your keys when you leave your car.

Shoelace

Getting locked out of your vehicle is one of those "oh crap" moments that can cause you to lose your day. It's a great idea to have a few tools that you can use to open your car without breaking any windows. These items are readily available and will save you money on locksmiths, or the time required to get roadside assistance.

A shoelace or twine can be used to unlock car services a car. It's easy to use and can be used on a variety of cars. This method is only applicable to cars that have post locks. They are stacked vertically on the window sill and are easily accessible from the outside the car. To get the job done, use a shoelace to create a slip knot, then move it into the crack between the door and window frame. Once the slip knot has been placed, pull the ends of the string up to lasso it.

This method is only applicable on older models that have a locked that is hooked. A screwdriver, should it be available, can help open a car the door in a more aggressive way. Another option is to grab a pole from a nearby object like a doorframe or a piece of wood, and stick it into the window frame to make space for the rod you'll use to push the lock's interior button.

While the methods mentioned above are generally safe for the majority of drivers, it's advisable to call for assistance when you can. This will prevent any additional damage to your vehicle, and will also decrease the risk of an accident resulting from the stress of the situation. If you don't own a mobile phone or aren't able to call for help, remember that it's important to let trusted friends and family members know where your car is at all times. A spare set of keys must be kept in a convenient location on your vehicle.

Wire Hanger

It is a frustrating situation to lock your keys inside your car. The key is to stay at peace and think through all options rationally. This will prevent you from making the problem worse, which is something that can occur in the event of panic.

One of the best options is to make use of a modified wire coat hanger to get back into your vehicle. You will need to uncoil the coat hanger to ensure that it has a straight end and a hook that you can use to move the lock rod within your door. Once you are able to reach the rod that locks your door and you are able to pull it up and open the door.

Another option that you can try is using a rod, or even the metal of your car's body. It is crucial to make sure that you don't cause damage to your vehicle during the process and it is best to do it without taking the car apart. Also, try to be as patient as possible since this method is more likely to work better on older vehicles than on the latest models, but it can still be utilized in the case of a model with a unique outer door handle design.

You can do the same thing with the shoestring tied in with a slip knot. This is a good idea for the postlock, but it is more difficult to maneuver as you'll rely on the tension of the string to hold it. The best way to do this is by threading the shoestring through a small hole you can make in the weatherstripping on your vehicle's door. After the shoestring has passed through the weatherstripping, you are able to pull the string tight to create a tight loop that will snap around the lock. If you're lucky the lock will be placed in the correct spot.