Tilt and Slide Patio Door Repairs Near Me

Whether you enjoy hosting friends or simply enjoying the outdoors, patio doors are a convenient way to transition from indoors to outdoors. If your patio door isn't sliding smoothly, you might need to alter it.

Remove the plastic plugs and locate the adjusting screws on the lower rail to adjust the height or lower of your door. Make sure the door is even and moves smoothly (Photo 1).

Window Treatments

When choosing window treatments for a sliding door it is crucial to consider light control, privacy as along with aesthetics. Do you want to block sunlight from shining onto your furniture or artwork? Or would you prefer that sunlight is only allowed to enter when the sun is not too low in the sky.

The type of window treatment you select can also give you a more custom appearance. If your sliding patio door is only one glass pane you can make use of mullions to separate the pane into smaller ones for a more decorative appearance. Window treatments can be made from hard or soft materials and include anything from drapes, curtains and valances to cellular shade, roller shades and woven wood shades. They can be placed on top of other window treatments, such as a swag or as a stand-alone item.

Vertical blinds are among the most popular window treatments for patio door. They have large fabric panels, called vanes that can be tilted open and close, letting you control the amount light that enters your home. They can be operated by a wand, chain and cord that can be pulled or pushed, or motorized.

Window films can be used to reduce the glare and conserve energy on the patio that slides. They can be used to enhance your sliding door, or as an alternative window treatment like cell shading.

You can pick an swag or a valance to cover your sliding door to give it a more traditional appearance. These are available in many shades and fabrics. They are available in classic tab, pinch pleat and grommet designs. You can also get them with a blackout liner for more privacy and light control.

It is important to keep in mind that a patio door should be able to slide between closed and open, so it's best to hang your window treatments at a height to allow for this. This will make them safe for children and pets.

If your window treatments aren't in the form a drape or have no rod pocket, you can make use of the traverse bar to allow them to slide horizontally across the sliding door. Make sure you hang them at least an inch above the top of your patio door repair near me doors in order to keep them from brushing heads passing through.

Rollers

If your patio door starts to squeak it is most likely due to worn rollers. The rollers, located at the bottom of the door, allowing it to slide along a track, can get stuck or rust over time. This could make the doors difficult to open and close, and produce loud noises in motion. There are several ways to repair your sliding door so that it can slide back and forth.

The first thing you can try is to grease the tracks. This will make the door move more easily and should be done at least twice every year. You can buy a good lubricant at the local hardware store. If you have tracks made of vinyl, use a silicone spray. If you have wooden tracks, you can use an oil-based lubricant made of wax. If the lubricant fails to work, you may need to replace the rollers.

You could also try to adjust the rollers. This is a two-person job as you'll need to lift the doors, and then locate the screws in plastic at the bottom of the track. The screws have a tiny plug that must be removed with an screwdriver. These screws can be rotated to raise or lower rollers and let the door touch less of the track.

Another possibility is that the doors aren't aligned properly in the track. This can create a gap between the door and the frame. This can allow cold air to get in during a cold winter morning, or hot air to escape during a warm day. If this is the situation you'll need to remove the door and frame to see what is causing it to gape.

If the gap was caused by the track you can repair it by removing the upper part of the track. Then screw it back into place. The gap can also be closed by installing a new set of tracks that will give the door something to rest against it is in use.

Tracks

It could be the time to lubricate your tracks if your doors aren't closing or opening smoothly. This is a simple task that will help in improving the ease of operation of your patio door.

Take the door off the frame and set it on a flat, level surface that is not in your way while you are working. If the door is heavy, it may be necessary to have someone else help you lift and hold it while you work. Make use of a brush and hot soapy water to thoroughly clean the track of your sliding door. If your doors have blinds that are placed between the glass, make sure to vacuum them as well.

Dirt and dust can accumulate around the lower/lift operators of the Next Dimension vinyl patio door which can affect their operation. If your door is fitted with these, make sure to clean the surface frequently using a vinegar and water solution or a household window cleaner.

Signature and Pro patio doors come with an antilift block in their head pocket. They require a 3 to 6 inch opening to remove this feature and lower the sill track. Slide the sash/panel into an open position, then lift it up to tilt it inward. This will clear the sill pocket to allow the track to lower away from the head jamb. Repeat the process for both sides of the sash/panel.

Glass

It can be a problem if your patio door glass cracks. It can prevent sunlight from entering the home, making the space unusable. Glass that has cracked can be dangerous, as it can shatter and cause injuries if someone gets struck in the head by shattering pieces.

It's a good thing that it's relatively easy to repair broken doors and frames. The first step is to clean the glass to remove any dust and dirt that has accumulated over time. After cleaning the glass you can apply an opaque coating to protect it from the elements. You can also apply a decorative film to the door to enhance its privacy and style.

A roller that is not aligned could be the reason behind your sliding glass door not rolling smoothly. Usually, the adjustment screws are located on the bottom of your door. They could be covered by trim caps. If you can't locate the screws, try lifting or lowering your door until it appears at a level with the track.

Before you attempt to repair a sliding glass door, make sure you have all the tools you need. You'll also require the screwdriver and wrench and caulk or plastic putty. You'll have to move all furniture away from the front door so that you can work easily. You can also place blankets or foam sheets under the door to protect it against scratches when you remove it and replace it.

The first thing that our engineers do when they arrive at a job site to fix the tilt and slide patio door is to determine the manufacturer of the mechanism. You can do this by removing the covers on the rollers (bogies) which are located at the bottom of the door. Alternatively, you can look for a label on the side panel or handle. If you cannot find the label, it's recommended to contact the manufacturer.