Repairs to uPVC Windows

upvc window repairs near me windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers to help the new pane to fit properly into the window frame.

If you are going attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and timber long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll have to open the window to get to the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and timber damp walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with a breeze. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler with someone else to assist in holding the frame in place.

Check that the uPVC hinges open and close in the proper direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either by opening the window repair near me improperly or due to a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are always happy to offer advice.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. If they are beyond repair, it could be required to realign them. The interlock may also become disaligned. It is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the risk of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert immediately.