Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this situation you'll need to find some plastic spacers that will aid the new pane in being able to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Windows that leak water do are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the old caulking may require removal before a new layer can be applied. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window repairs near me. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens with the breeze. They can be replaced by any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a very simple process, but it's easier with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to give suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop where the sash meets the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it might be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be positioned on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.