Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, you will need to find some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the distance between the window and the door is significant, you may prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is essential to replace your seal as soon as you can to ensure that your upvc window repairs near me window watertight and draughtproof.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze it could be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, causing an opening where the sash meets frame. They can be fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.