Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. After that, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can also be caused near By the handle mechanism wears out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely that the problem is with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be happy to give you suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also be misaligned due to wear, which can cause an opening where the sash meets frame. They can be fixed by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional immediately.