Is It Time For Replacement Double Glazed Windows?

Replace your windows to increase your home's energy efficiency. These modern designs are constructed with uPVC or aluminium frames that insulate your living space, trapping heat inside.

If you've noticed signs of condensation, draughts or leaks in your window frame, it's time to consider replacement double glazing. Find a local FENSA approved installer to start.

1. Excessive Condensation

Double glazing can help you keep heat in your home and lower your energy bills. If the condensation is too high and you are not aware of signs that your windows might need to be replaced. This could lead to many issues like mildew and mould.

Condensation happens when warm, humid air comes in contact with an icy surface. You may have noticed this at home when you've awakened to discover that your glasses have formed an oily coating on the surface, or you could have observed it outside when the temperature has dropped below dew point and water forms on the cool window glass.

This is often due to an increase in internal humidity when the outside temperature is dropping. Moisture can also form on the inside of windows if there's not enough ventilation or if the house is too hot and the windows are open while you shower or cooking.

The plaster exposed near the window will usually produce external condensation. It's not as bad as it sounds, because the sun's heat and the air's movement tends to dry it out. However, it's worth thinking about specialist glass that can help keep condensation from forming, such as Pilkington's ActivTM self-cleaning glass that has a hydrophilic coating that suffocates water and minimizes the impact of condensation.

In the case of internal condensation, if it's found between the window panes, this is a sign that the seal has been damaged and the window requires replacement. It is also possible that heat is leaving and it's advisable to have a professional investigate the problem.

2. Signs of wear and tear

Your windows don't speak however they try to send you signals that something is wrong. If you observe signs like condensation, draughts, and cracks, it might be the time to replace your double-glazed windows.

Modern uPVC Windows are designed to help reduce your energy bills and also provide insulation. They keep warm air in winter and hot air out in summer, saving you money. Even energy efficient double-glazed windows will require replacement sash windows in the future, since their lifespan is limited.

The most frequent sign that double-glazed windows are wearing out is condensation. The condensation typically occurs between two glass surfaces. It can be a sign that the seal is failing or that your windows might not be as energy-efficient as they once were.

Another indication is that windows are sweating on the inside. This happens when the temperature of your home is below the dew point. This causes water vapour to condense on the the windows. This could also result from a leak or damage to the seal.

It is best to hire an professional to replace your windows if they show signs of wear. This is a job which shouldn't be done as a DIY task because it could be dangerous and can result in broken glass. Hire a company who specializes in installing double-glazed windows. They will have the proper tools and safety equipment to complete the job. In addition, they will be in a position to offer advice about the different types of double-glazed windows available and the best ones for your home.

3. Unsealed Windows

Double-glazed windows are made of two panes and an opening between them. This creates an insulating barrier to stop your warm air from venting out and cold air from outside getting in. The double glazed window is more efficient in energy use than single pane windows, and can reduce your energy bills significantly by keeping your home warmer for longer.

In a window that is sealed, the space between the two glass panes is filled with inert gases such as argon, xenon and Krypton. These gases impede the transfer of heat through the window which makes it more energy efficient, and also lowering the cost of heating. But over time, the seal between the glass may fail and allow normal air to pass through, which will decrease its insulation capabilities.

Foggy windows can also be an indication that your window seal is not working properly and allowing moisture to get through. As the weather changes, fog typically disappears. However, you may still feel the draughts.

A weak seal on windows could allow pests such as ants, cockroaches and centipedes enter your home. It can also allow dirt and pollen in which can cause allergies inside your home. A solid window seal will also help reduce noise from the street or other sources.

If you're unsure if your seal is damaged check it as soon as you can. A professional will be able to replace the damaged IGU and fix it. They will usually disassemble the window's sash and then take out the old IGU unit and install the new one. If the IGU unit is covered under warranty the contractor or manufacturer will cover the Cost Of A Window Replacement. If you don't have a replacement, you'll have to put up your windows.

4. Faulty Windows

Double-glazed windows can help you save energy costs. They let in more light and block out exterior sounds, while also keeping your home insulated. However, when they are not working properly, it could cause condensation and drafts in the house. It is essential to have these windows repaired or replaced in the earliest time possible to prevent damage and leaks from happening.

The most obvious indication that your double glazed windows aren't sealing correctly is the emergence of condensation. The space between the panes develops a fogginess which cannot be removed from either side. The seal around the glass panes is broken, allowing gasses such as argon and krypton (which are gases) to escape. This creates a humid space within your home.

An increase in your energy bill is another indication that your windows no longer work as they should. Windows are designed to ensure that warm air cannot escape and cold air cannot get in. Any change in your utility bill is a good indication that it's time to replace double glazing.

Poor installation is often the reason for faulty windows. Installing a window cost replacement requires precision, expertise and training. Homeowners should not try to do the job themselves. Incorrectly installed windows could cause mold growth, water leaks, and even leaks. Poor cleaning and care of windows could lead to premature failure. This can be caused by the use of harsh chemicals and power washing that can damage frames, seals and glass. Replacement of your windows by a reputable firm is the best way to avoid these problems and ensure they will last for many years to come.

5. Increased Energy Bills

With the rising cost of fuel continue to impact homeowners, it is essential that homes use their energy in a way that is efficient and avoid excessive use. The windows in your home can be a significant contributor to the energy efficiency of a house. If your energy costs are rising, it could be time to replace your double-glazed windows.

Draughts and leaks that occur in old windows can increase your energy costs significantly. This is because they let cold air in the home and could cause loss of heat. However by converting your windows and the use of more modern technology, you can get rid of these issues and enjoy an energy efficient home all year.

Double-glazed windows can aid in keeping your home warm in winter months by trapping warm air and keeping out cold air. This can decrease your dependence on central heat and make your home more cost-effective.

Double glazing can also be an asset during warmer months as it prevents excess heat from being trapped inside of your home. This can reduce your energy bills and impact on the environment.

Double-glazed retrofit windows are a great option for homeowners who want to cut down on their energy costs but don't have the money to replace all of their windows. The installation process is much faster and requires far less materials since the frame and sash remain intact. This also lets the homeowner pick their preferred style of window but still benefit from the insulation of a high-quality IGU. The glass can also be filled with argon to increase energy efficiency.