Locked Keys in car door unlock service? Here's How to open lock without Key to Open Your Car Without Damage

If you've locked your keys inside your car, don't panic. You can try many techniques before calling a roadside assistance or locksmith service.

For instance, you could make use of a shoelace with the slip knot to secure an old post lock or a coat hanger made of wire that you untwist and mold into hook. You can also make use of an inflatable wedge or door wedge.

Pump Wedge

If you've found yourself in a car locked up and none of the DIY methods like shoestrings, wire hangers or wedges work for you It's time to contact a professional. A locksmith or repo service provider may have lockout tools that will allow you to unlock your car without damaging it.

If they do, make sure you use them in a proper manner. Most importantly, know where to place the wedge tool. A lot of people place the wedge tool in the upper corner of a door, which is the most vulnerable. This is a mistake, as you may damage the weather stripping and wires inside the doors. Instead, place the wedge in the most extensive part of the gap you can see and where it has the most leverage.

The Pump Wedge is a high-quality inflatable wedge made of heavy duty non-marring vinyl. It slides between the door of your vehicle and the door frame. It is filled with air to create a gap which allows you to insert other tools such as an extended reach car opening tool rod. It also has a hook at one end, which you can shape to secure the latch within the door handle.

A less costly alternative is a pair of wooden door stops. They can be placed at the rear of the door to make the gap wide enough for rods. You can also use a slim Jim, a thin strip of metal that is bent into a hook, and then used to secure the lock. This method is not for the faint-hearted as you must be sure not to damage the weather stripping that is on your door.

Another alternative is to use a shoelace however, this is only applicable to older vehicles that do not have a push-button unlocking mechanism. You can tie a slip knot through the middle of the lace and then move it upwards and downwards through the door's seam until you find the latch. Then move the lace upwards and down until it hooks on the lock. Secure the slip knot, then pull upward. This is more difficult and could scratch the paint on the door or dent the trim if you are not careful.

Inflatable Wedge

If you own a wedge-shaped inflatable car door opener, you'll be able to quickly unlock your vehicle without the need for prying or slim jim tools. These wedges for cars can be inserted between the window and the frame of the vehicle and when they're inflated, they create a space enough to fit tools with a long reach, such as slim jims or a button grabber. This method is less risky than using tools to pry and is a good option if you don't have an screwdriver.

Another option to unlock a car without damaging its interior or exterior is to make use of a coat hanger made of wire that has been shaped into a hook shape. This can be used to secure the lock and may be more effective than a flat screwdriver because it is less likely to cause damage to the paint of the car. You should still check the other doors to make sure there's no other means to gain access.

You could also try using a plastic bag that has been bent into a noose-like or v-shaped shape, but you will need to be careful not to tear it, as this could make your situation even more complicated. This method is particularly useful when you are unable to locate the lock button. This method isn't as reliable as a wedge, or a coat hanger, but it could help you in an emergency.

Be safe and remain calm. There are several ways to solve this problem. If you've read this article, you'll be prepared for any scenario that could occur. You can unlock your vehicle by following our steps. This will help prevent unnecessary damage and stress. Of course, if you are able, make sure to bring your keys with you before you leave your car.

Shoelace

Getting locked out of your vehicle is one of those "oh crap" moments that can make your day miserable. In the event of a crisis it's best to keep a few items on hand that can aid in unlocking your car without damaging the windows. Certain of these items can be easily found and can help you save money on a locksmith, or the time required for roadside assistance.

A shoelace or twine can be used to unlock a car. It is easy to use and can be used on many different automobiles. The key to this method is a car equipped with post locks. They can be placed vertically on the window sill and are easily accessible from outside the car. To complete the task, use a shoelace to create a slip knot, then squeeze it into the gap between the door and window frame. Once the slip knot is positioned, pull the ends of the string up to pull it tighter.

This technique may only work on older models that have an open lock with a hook. A screwdriver, if available could help open the door in a slightly more aggressive manner. Another option is to snag an object from a nearby object, like a doorframe or a piece of wood, and then stick it inside the window frame to make space for the rod that you will use to push the lock's interior button.

Although the above strategies are safe for the majority of drivers, it's best to call for assistance whenever possible. This will help prevent further damage to your car and reduce the risk of a crash due to stress. If you don't have a phone or aren't able for help It is important to let trusted friends and family members know where your car is at all times. Also having a spare set of keys can be kept in an easily accessible spot on the vehicle, so you can get them back if needed.

Wire Hanger

There is no doubt that locking your keys in your car could be a very frustrating situation. It is important to remain calm and consider your options carefully. You will not make the situation worse if you don't be in a panic.

One of the best things you can do is make use of a modified wire coat hanger to get back in your vehicle. You will need to uncoil the coat hanger until it has a straight end and a hook, which you can use to move the lock rod within your door. Once you can reach the lock rod you should be able to pull it up and allow you to open the door.

Another option you could consider is to use a rod or even an element of metal from the body of your vehicle. It is important that you make sure that you do not cause any harm to the vehicle during this procedure and it is best if you can do so without removing the car apart. This method is more effective on older cars than on modern ones. However it is possible to use it on models that have unique door handles.

You can do similar things using the use of a shoestring tied into with a slip knot. This will also work on a post lock, however it is slightly more difficult to use because you'll be relying on the tension from the string to hold the lock. It is possible to do this by threading a shoestring into the tiny hole in the weatherstripping that is on the doors of your vehicle. Once the shoestring is through the weatherstripping, you can pull it tight to form an elongated loop that will snap around the lock. This method can be very effective if you're fortunate enough to locate the lock in the right spot.