Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers to assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional is able to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you may want to consider using a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts and even security. It's important to take action when you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll have to open the window to get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the fit of your window repairs, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, Upvc Window Repairs causing them to loose their elasticity. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. It is crucial to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change a window hinge, but it's simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to provide advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, could become misaligned. This can cause an opening to appear where the sash meets the frame. If they're beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it is feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the risk of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.