Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the fabric instead of onto the floor where they could be trodden under and upvc window repair cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you may want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows to get at the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can be caused by the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most common reason for leaking upvc window repair, Net Pier explains, windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repair near me repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze It could be the hinges that are at fault. These are easily repaired by any skilled DIYer and are usually done within a few minutes.

Like all mechanical parts hinges will wear out over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to offer assistance.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, creating a gap where the sash meets frame. If they're beyond repair, it could be necessary to get them re-aligned. The interlock may also become unbalanced. It is located on the hinge side and may need to be cleaned. In certain instances it is possible to replace them.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.