Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and Upvc Window Repairs doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation, you will need to source some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window repairs. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and upvc Window Repairs do a test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone else helps you to hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges because of wear and tear, can become misaligned, this causes gaps to develop where the sash joins the frame. This can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace these.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window you should consult a professional as soon as possible.