Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed from the window repairs, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and perform a test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and Window Repairs can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze It could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to change a window hinge however it is easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to give assistance.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges may also become misaligned due to wear, which can cause gaps between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and window repairs repairs, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.